Login | Shopping Cart (0) | My Account | Support | Contact Us   

Supermicro X7DA3+  E-mail this product to a friend - Quad/Dual Core Xeon - Up to 32GB RAM - Adaptec SAS Controller - 2 PCI-e, 3 PCI-X, 1 PCI - Proprietary ATX Price: $548.00 Quantity:

Physical Stats Form Factor Extended ATX  Dimensions 12.075" x 13.05" (30.7cm x 33.2cm) Processor/Cache CPU Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz Dual-Core Intel® Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz System Bus 1333 MHz, 1066 & 667 MHz system bus Operating System Software Supports 64-bit Operating Systems Supports 32-bit Operating Systems System Memory Memory Capacity Eight 240-pin DIMM sockets Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported Memory Type 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 512 MB, 1GB, 2GB, 4GB Memory Voltage 1.8 V only 1.5V(AMB) Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset Intel® 5000X (GreenCreek) chipset MCH + PXH-V + ESB2 SAS Adaptec AIC-9410W Serial-Attached SCSI (SAS) Controller SAS Dual-Channel (internal) Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives Host RAID 0, 1, & 10 support SATA Intel ESB2 SATAII Controller RAID 0, 1, 5, 10 support (Windows) RAID Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR2 or AOC-LPZCR3 SAS RAID 0, 1, 5, 10 Optional: (Card NOT included) IPMI Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) ((Optional: AOC-SIMLP-B) (Optional: AOC-SIMLP-3) with 3rd LAN support NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot Network Controllers Intel® 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scalable, and reliable networking Super I/O Winbond 83627HG chip Input / Output Serial ATA Six Serial ATA ports Six SATA hard drives supported IDE Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Compact Flash (40-pin connector, IDE 1, single channel) slot Floppy 1 Floppy controller; 1.44 MB, 2.88 MB LAN 2x RJ45 LAN ports USB 4x USB rear ports 2x USB internal header 6 total USB ports, 2.0 Compliant / 1.1 Compliant Audio 7.1 High Definition audio Keyboard / Mouse PS/2 keyboard and mouse ports Serial Port / Header 1 Fast UART 16550 serial port Parallel Port 11 ECP / EEP parallel port

Expansion Slots PCI-Express 1 (x16) PCI-e slot 1 (x4) PCI-e (using x16) slot PCI-X 2x 64-bit 133/100MHz PCI-X (3.3V) slots 1x 64-bit 100MHz PCI-X (3.3V) slot PCI 1x 32-bit 33MHz PCI (5V) slot System BIOS BIOS Type 8Mb Flash EEPROM with Phoenix® BIOS BIOS Features Plug and Play (PnP) SMBIOS 2.3 DMI 2.3 PCI 2.2 ACPI 1.0 PCI-X 1.0 USB Keyboard support Hardware BIOS Virus protection Management Software OOptional IPMI (Intelligent Platform Management Interface) v2.0 Super Doctor III Watch Dog /li> NMI Power Configurations ACPI Power Management Main Switch Override Mechansim Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off CPU Fan Auto-off in Sleep Mode Power-on mode for AC power recovery Internal/External modem remote ring-on Suspend to RAM (STR) PC Health Monitoring CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, -12V & +5V Standby, VBAT CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V FAN Total of eight 4-pin fans 8x fans with status monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis, environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED Suspend-state Indicator LED +5V Standby Alert LED Other Features Chassis intrusion detection Chassis intrusion header SDDC Support Operating Environment / Compliance RoHS RoHS Compliant 6/6, Pb Free Environmental Spec. Operating Temperature: 10º to 35º C (50º to 95ºF) Non-operating Temperature: -40º to 70º C (-40º to 158º F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)