|
 | | AS-2042G-6RF | - A+ Server 2042G-6RF (Black)
|
| | |
| | Super H8QG6-F |
| | |
| | CPU | - Quad 1944-pin Socket G34
- Supports up to four Twelve/Eight-Core ready AMD Opteron™ 6100 Series processors
- HT3.0 Link support
| | Chipset | - AMD SR5690/SR5670/SP5100 Chipset
|
| | |
| | Memory Capacity | - Thirty-Two DIMM sockets
- Support up to 512GB DDR3 Reg. ECC 1333/1066/800 MHz memory or 128GB of DDR3 Unb. ECC/non-ECC memory
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - Registered ECC or unb. ECC / non-ECC DDR3 1333/1066/800 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB, 16GB
| | Memory Voltage | |
| | |
| | SATA | - AMD SP5100 (RAID 0, 1, 10)
| | SAS | - LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-IMRRAKEY-2008-LSI
RAID 5 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| | Network Controllers | - Intel® 82576 controller, Dual-Port
Gigabit Ethernet - 10/100/1000BASE-T support
| | VGA | - Matrox G200 16MB DDR2 graphics
| | Super I/O | |
| | |
| | SATA | | | SAS | - Integrated LSI 2008 SAS2 Controller
- Eight Serial Attached SCSI (SAS) ports
- Optional RAID 5 support
- 8x 6Gbps SAS / SATA ports
| | LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
| | USB | - 7x USB 2.0 ports
- 2x Rear, 4x internal header, and 1x type A
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| | |
| | PCI-Express | - 2x PCI-e 2.0 x16
- 2x PCI-e 2.0 x8
- 1x UIO slot
|
| | |
| | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | 3.5" (89mm) | | Width | 17.2" (437mm) | | Depth | 27.9" (709mm) | | Gross Weight | 69 lbs (31.3kg) | | Available Colors | Black |
| | |
| | Buttons | • Power On/Off button
• System Reset button | | LEDs | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED | | Ports | 2x USB Ports + DB9 COM Port (optional) |
| | |
| | Hot-swap | 6 x 3.5" SAS / SATA Hot-swap drive trays
SAS or enterprise SATA HDD only recommended |
| | |
| | 1x 2U SAS / SATA backplane w/ SES-II |
| |
| | Fans | 6x 80mm 6500 RPM fans |
| | |
| | Redundant 1400W high-efficiency power supply with PMBus | | AC Input | - 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
| DC Output
+5V standby | | DC Output
+12V | - 100 Amp @ 100-140V
- 116 Amp @ 180-240V
| | Certification | 80 PLUS Gold Certified
|
| | |
| | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, sVBAT, HT, memory, chipset
- CPU switching voltage regulator
| | FAN | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
