Login | Shopping Cart (0) | My Account | Support | Contact Us   

Supermicro X7DBE+  E-mail this product to a friend - Quad/Dual Core Xeon - Up to 64GB RAM - SATA RAID 0, 1, 5, 10 - 3 PCI-e, 3 PCI-X Slots - Enhanced Extended ATX Price: $518.00 Quantity:

Physical Stats Form Factor Enhanced Extended ATX Dimensions 13.68" x 13" (34.7cm x 33cm) Processor/Cache CPU Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz Dual-Core Intel® Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors System Bus 1333 / 1066 / 667 MHz system bus Operating System Software Supports 64-bit Operating Systems Supports 32-bit Operating Systems System Memory Memory Capacity Sixteen 240-pin DIMM sockets Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported Memory Type 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 512 MB, 1GB, 2GB, 4GB Memory Voltage 1.8 V only 1.5V(AMB) Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset Intel® 5000P (Blackford) chipset MCH + PXH + ESB2 SATA Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support IPMI Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP-B(+)) (Optional: AOC-SIMLP-3(+)) with 3rd LAN support Network Controllers Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking Graphics ATI ES1000 controller with 16 MB of video memory Super I/O Winbond 83627HG chip Input / Output Serial ATA Six Serial ATA ports Six SATA hard drives supported IDE Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Floppy 1 Floppy controller; 1.44 MB, 2.88 MB LAN 2x RJ45 LAN ports USB 2x USB rear ports 3x USB internal headers Total 5 USB 2.0 Compliant / 1.1 Compliant VGA 1x VGA Port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Port / Header 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header Parallel Port 1 ECP / EEP parallel port

Expansion Slots PCI-Express 2 (x8) PCI-e slots 1 (x4) PCI-e (using x8) slot 1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX) PCI-X 2x 64-bit 133MHz PCI-X (3.3V) slots 1x 64-bit 100MHz PCI-X (3.3V) slot System BIOS BIOS Type 8Mb Flash EEPROM with Phoenix® BIOS BIOS Features Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 PCI 2.2 ACPI 1.0 USB Keyboard support Hardware BIOS Virus protection Management Software Optional IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Watch Dog NMI Power Configurations ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem remote ring-on PC Health Monitoring CPU Monitors for CPU Cores, +3.3V, +5V, +5V Standby, & ±12V 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V FAN Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support LED CPU / System Overheat LED Other Features Chassis intrusion detection Chassis intrusion header SDDC Support Operating Environment / Compliance RoHS RoHS Compliant 5/6, Server Exemption Environmental Spec. Operating Temperature: 10º to 35º C (50º to 95º F) Non-operating Temperature: -40º to 70º C (-40º to 158º F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)