   |
|
Base Price: $495.00
Customized Price: $495.00
Customized Price: $495.00
Please select the available options below.
Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.
| Specification | |||||
| Dimensions |
3.5"(H) x 19"(W) x 28"(D) | ||||
| Front Access Connector |
2 X USB ports, 1 X DB9 port | ||||
| Front Access switch |
Power On/Off, Reset, Alarm Reset | ||||
| Front Panel Indicators |
Power On, HDD Activity, PSU failure, Fan failure, Overheat warning, LANs | ||||
| Hot swap drive indicators |
Power On, HDD Activity, HDD failure | ||||
| Power Supply |
500W 2+1 Hot-swap redundant power supply | ||||
| Power Supply Options |
460W Fixed, 600W Fixed | ||||
| System Board |
Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant | ||||
| Drive Bay |
| ||||
| Data Backplane |
| ||||
| Included Data cable | Choose from cable options | ||||
| Included slide rail | Yes | ||||
| System Monitoring |
Fan / over heat / power supply fault detection | ||||
| Thermal |
Intel Validated Pass Xeon 3.73Ghz 1066Mhz | ||||
| SATA backplane Specification |
|
1. A power MOSFET to provide disk spin-up control 2. A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane. 3. LED: Blue ON = HDD present; Blue Blinking = Drive activity; Red=Drive failure 4. A 4x2 header for Drive activity and Drive failure LED signal input 5. Single DC input to provide better cable management 6. Option for SATA PTP. SAS, multilane and miniSAS 7. Option support SAS expander |