Categories

Please select the available options below.

Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.

Specification

Dimensions

5.4"(H) x 19"(W) x 28"(D)

Front Access Connector

2 X USB ports, 1 X DB9 port

Front Access switch

Power On/Off, Reset, Alarm Reset

Front Panel Indicators

Power On, HDD Activity, PSU failure, Fan failure, Overheat warning, LANs

Hot swap drive indicators

Power On, HDD Activity, HDD failure

Power Supply

650W 2+1 Hot-swap redundant power supply

Power Supply Options

460W Fixed, 600W Fixed. 800W redundant

System Board

Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant

Drive Bay

Internal slim FDD x 1

Internal slim CD x 1

Internal slim 2.5" x 1 ( 3 maximum )

Internal 3.5" x 2 (optional)

Hotswap Bay x 16

Data Backplane

Serial ATA PTP

Serial ATA Multilane

Serial Attached SCSI

Included Data cable

Choose from cable options

Included slide rail

Yes

System Monitoring

Fan / over heat / power supply fault detection

Thermal

Intel Validated Pass Xeon 3.73Ghz 1066Mhz

SATA backplane Specification

1. A power MOSFET to provide disk spin-up control 2. A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane. 3. LED: Blue ON = HDD present; Blue Blinking = Drive activity; Red=Drive failure 4. A 4x2 header for Drive activity and Drive failure LED signal input 5. Single DC input to provide better cable management 6. Option for SATA PTP. SAS, multilane and miniSAS 7. Option support SAS expander

*Power Options

*Backplane Options

*Cable Options