   |
- Socket 370 CPU
- Celeron/Pentium III
- 815E Integrated Gfx
- IB2 Cable Kit included Regular Price: $350.00 On Sale For: $340.00 |
IB745 SPECIFICATIONS
CPU Socket:
Socket 370
CPU:
Intel® Celeron® processor/Intel® Pentium® III processor; 533MHz~1.2GHz
CPU Front Side Bus:
66MHz / 100MHz / 133MHz
Chipset:
Intel® 815E (B-Step) Chipset
L2 Cache
CPU integrated
BIOS:
Award 4Mbit FWH BIOS
System Memory:
Three DIMM sockets support up to 512MB SDRAM
VGA:
815E integrated graphics; Shared memory;
Optional 4MB display cache on board
Optional Panel Link (SiI164) w/ 24-pin DVI-D connector
(with IBD741P daughter card)
LAN
ICH2 integrated Ethernet controller
10Base-T / 100Base-TX Protocol
Optional Dual Ethernet solution
Audio
ICH2 integrated audio
Optional AC97 and external audio connector
LPC I/O
ITE8712 supports IrDA x 1, Parallel x 1, COM1 (RS232), COM2 (RS232/485), FDC up to 2.88MB (3Mode support) Hardware Monitor (3 thermal inputs, 8 voltage monitor inputs, VID0-4, chassis open detection, 3 fan headers), Smart card reader
ICH2 integrated Ethernet controller
10Base-T / 100Base-TX Protocol
Optional Dual Ethernet solution
Audio
ICH2 integrated audio
Optional AC97 and external audio connector
LPC I/O
ITE8712 supports IrDA x 1, Parallel x 1, COM1 (RS232), COM2 (RS232/485), FDC up to 2.88MB (3Mode support) Hardware Monitor (3 thermal inputs, 8 voltage monitor inputs, VID0-4, chassis open detection, 3 fan headers), Smart card reader
IDE Interface:
Built in ICH2; Two enhanced IDE interface supports 4 IDE devices including UDMA33/66/100, PIO mode 4 and bus master
FDD Interface:
Supports up to two floppy disk drives: 3.5" and/or 5.25" drives; 3 Mode support
Parallel Port:
One parallel port supports SPP/EPP/ECP
Serial Ports:
One RS-232/422/485 and one RS-232 port
Watchdog Timer:
Generates system reset; 256 levels
Solid State Disk Interface:
Supports 2MB~144MB M-Systems DiskOnChip flash disk
Hardware Monitoring:
Built in ITE8712; monitors system/CPU temperature and voltage status
USB
USB 1.1
Built in ICH2; Two enhanced IDE interface supports 4 IDE devices including UDMA33/66/100, PIO mode 4 and bus master
FDD Interface:
Supports up to two floppy disk drives: 3.5" and/or 5.25" drives; 3 Mode support
Parallel Port:
One parallel port supports SPP/EPP/ECP
Serial Ports:
One RS-232/422/485 and one RS-232 port
Watchdog Timer:
Generates system reset; 256 levels
Solid State Disk Interface:
Supports 2MB~144MB M-Systems DiskOnChip flash disk
Hardware Monitoring:
Built in ITE8712; monitors system/CPU temperature and voltage status
USB
USB 1.1
Supports 4 USB ports
IrDA
Pin header
Keyboard and Mouse Connector:
PS/2 type
Extra Features:
ISA High Drive
PCI to ISA Bridge
One MicroPCI socket
Form Factor:
Full Size
Dimensions:
338mm x 122mm (13.3"x 4.8")
Power Requirement:
+5V : 15A (max)
-12V : 0.5A (max)
+12V : 0.5A (max)
Environmental Factors:
Operating Temperature: 0°C~60°C (32°F~140°F)
Storage Temperature: -20°C~80°C (-68°F~176°F)
Relative Humidity: 10%~90% (non-condensing)